There is no single price for a new boiler. As a rough UK guide, national price guides put most gas boiler installations somewhere between about £1,800 and £4,000 fully fitted, but that is a general idea only, not a quote. The final price depends far more on your home and the work around the boiler than on the boiler itself. This guide explains what you are paying for, the extras that change the price, and how to compare quotes. For an accurate price for your home, give us a call.
Key points
- As a rough UK guide, a new gas boiler costs around £1,800 to £4,000 fitted. Your own price depends on your home and the work needed.
- Moving the boiler or changing to a different type of boiler adds to the cost because of the extra pipework and flue work.
- A cheap quote that leaves out the system clean, filter or controls can cost you more in the long run.
- Government grants such as the Boiler Upgrade Scheme do not pay for gas boilers. They only cover heat pumps and biomass.
What a new boiler costs: a rough guide
National price guides, such as Selectra’s 2026 boiler cost guide, put most gas boiler installations in the UK at roughly £1,800 to £4,000 fitted, including the boiler, labour, a standard flue and removing the old boiler. Treat that as a general idea, not a fixed price. Two homes with the same boiler can end up with very different quotes because of what else needs doing.
| Boiler type | How it usually compares | What tends to change the price |
|---|---|---|
| Combi | Often the simplest job when replacing a combi like for like | Brand and model, output, flue position, gas pipe size |
| System boiler | Similar to a combi for a straight swap | Condition of the hot water cylinder, extra pipework |
| Conventional (regular) boiler | Similar for a like for like swap | Loft tanks, or converting to a combi or system boiler |
What a fitted price should include
A proper boiler installation is more than hanging a new boiler on the wall. Before you compare prices, check each quote covers:
- A survey of your home to size the boiler correctly for the number of bathrooms, radiators and people.
- Removal and disposal of the old boiler.
- Cleaning the system before the new boiler goes on. Most manufacturers require this to honour the warranty.
- A magnetic system filter and inhibitor to protect the new boiler from sludge.
- A new flue in the existing position, and a condensate pipe that is protected against freezing.
- Controls, at least a programmable room thermostat, as required by current Building Regulations.
- Commissioning and registration, including the Building Regulations notification that a Gas Safe registered engineer makes on your behalf and the manufacturer warranty registration.

Extra costs that change the quote
The biggest differences between quotes usually come from the work around the boiler. These are the common ones:
- Moving the boiler, for example from a kitchen to a loft or utility room. New pipework, a new flue route and gas pipe changes all add time. Moving or changing the type of boiler adds to the cost, sometimes significantly.
- Converting to a combi from a system with a hot water cylinder and tanks in the loft. It frees up space, but it means removing the old cylinder and tanks and altering pipework.
- Upgrading the gas pipe. Modern combis need a good gas supply, and older homes sometimes have a pipe that is too small to run one properly.
- A powerflush if the system is full of sludge. A dirty system will damage a new boiler, so this is money well spent. Our powerflushing page explains when it is needed.
- Smart controls and new radiator valves, if you want better control of each room.
- Flue access, such as scaffolding when the flue goes out high on a wall or through a roof.
Combi, system or conventional?
The cheapest boiler is not always the right one. The type should match your home and how you use hot water.
- Combi boilers heat water on demand with no cylinder or tanks. They suit most flats and homes with one bathroom, and some larger combis handle two bathrooms well.
- System boilers work with a hot water cylinder, usually unvented, so several taps and showers can run at once. They suit larger homes with two or more bathrooms.
- Conventional boilers use a cylinder and tanks in the loft. They are often the simplest swap for older homes that already have this setup, especially where mains pressure is low.
If a cylinder is part of the plan, make sure your installer is qualified to work on it. Our engineers hold the G3 unvented hot water qualification as well as Gas Safe registration, so we can fit and service both the boiler and the cylinder.
Can you get a grant for a new boiler?
This is one of the most common questions we get, and the honest answer is usually no for a gas boiler.
- The Boiler Upgrade Scheme gives up to £7,500 off a heat pump. It does not cover gas, oil or LPG boilers.
- Energy company schemes such as ECO can fund a new boiler for some households on certain benefits or low incomes. Eligibility is strict and depends on the home’s energy rating, so check with your energy supplier or local council.
Be wary of cold calls and adverts offering a “free boiler” to everyone. Genuine schemes have clear eligibility rules.
How to compare boiler quotes
- Check the engineer is Gas Safe registered. You can search the Gas Safe Register by name or registration number. Ours is 665942.
- Make sure someone has actually looked at your home. A price given without a survey often changes on the day.
- Compare the same boiler and output. A 30kW boiler from one installer and a 24kW from another are not the same job.
- Look at what is included, using the checklist above. Missing items are where low quotes catch up with you.
- Ask about the warranty. Manufacturer warranties vary by model and installer, and almost all of them depend on the boiler being serviced every year.
- Read the reviews. Look at recent reviews from homes near you, not just the star rating.
Get a price for your new boiler
Call us and tell us about your home and your current boiler. We will recommend the right type and give you a price over the phone, with nothing hidden.
Alban Plumbing and Heating is featured on Three Best Rated, and you can read what customers say on our Rated Traders profile and our reviews page.
Frequently asked questions
How much does a new combi boiler cost to fit?
As a rough UK guide, national price guides put most fitted gas boilers between about £1,800 and £4,000, but every home is different. Moving the boiler or converting from a system with a cylinder costs more. Call us for a price for your home.
How long does it take to fit a new boiler?
A like for like swap usually takes one day. Moving the boiler or converting to a combi often takes two to three days because of the extra pipework.
Is it cheaper to repair or replace an old boiler?
For a boiler under about 10 years old with a one off fault, repair is usually cheaper. If it is older, breaks down often or needs a major part such as a heat exchanger, replacement is usually better value over the next few years.
Are there grants for a new gas boiler?
Not for most households. The Boiler Upgrade Scheme only covers heat pumps and biomass. Energy company schemes such as ECO can fund a boiler for some low income households, so check with your energy supplier or council.
Why do boiler quotes vary so much?
Mostly because of what is included. Some quotes leave out the system clean, filter, controls or flue work, and others are given without seeing the property. Compare the same boiler, output and list of work.



Comments are closed